RapidTac RAPID REMOVER Adhesive Remover for Vinyl Wraps Graphics Decals Stripes 1 Gallon Bottle

I used this product to remove the Diamond Shield from the front of my RV. I started to pull the plastic shield off using a plastic scrapper. Once I had a piece pulled away I used a spray bottle to spray this stuff behind the plastic and onto the adhesive. This stuff reduced the adhesive to a sticky mess that could easily be moved. I found the best way to get the residue off the RV was to soak a paper towel in RapidTac wipe down the surface. I kept turning the paper towel to get a clean surface otherwise you just move the adhesive around.I only used quarter of the bottle and offered the remainder to anyone in our resort. It was gone in minutes and they liked it as much as I did.It is expensive but it is half the price of the stuff offered by others. If I ever have to do this job again this is the stuff I would buy.

Highly recommend. Best stuff I’ve found so far. It turned hard glue from vinyl stickers into a liquid that melted off. A light scrape and wipe with a paper towel and the glue was gone.

I used this to remove sticky residue from removed decal lettering on a truck's van-box. It did the job with facility! To rid the surface of the residue, not much of a spray was necessary! The operation was rapid–––circa 1 minute after spraying is sufficient to wipe away the residue. A 2nd operation (spray & wipe) was necessary for the areas of thicker residue. The odor is only mildly unpleasant if at all. I think that it is non-toxic as it's made from citrus.---Richard Stuart Otto

Used this to remove the Diamond Shield from the front of my motorhome. It did a good job of removing the glue and now it looks wonderful. I ordered 2 gal and only used one. TIPs: 1. get the right scrapers (got mine at Harbor freight and there are other retailers that sell them (The plastic scrapers won't scratch your paint)... 2. watch the videos on you tube. they will give you a lot of good advise and show how much effort is needed. This is labor intensive so plan on spending some time doing it. 3. Make sure you give it the 1 to 2 minutes it needs to soften the glue before you scrape it off. Good stuff at the right price.

My wrap guy apparently did not use 3M, most likely Avery. The rap came off leaving tons of glue. Brake clean you name it didn't want to come off. Was told to use this by another professional, was a little tough yet to still get it all off but considering brake clean and everything else didn't do anything, a+. And it's definitely safer on your paint then other things

Good

great for removing all types of adhesives without harming the surface!

I use this for eliminating adhesive from automotive window tint that has been removed or for removing car emblem adhesive. It works great to soften the glue which helps to get it off the surface you are working on. The biggest con to this product is the smell. It does have a citrus scent to it but it is one of the stronger smelling products you can get. You'll need to use this in a very well ventilated area. We even use a respirator and you can still smell it through that. The smell also lingers for a day or 2 depending how much you use and where it's being applied. I would also recommend wearing gloves when using it because it can dry out your hands.Overall I would definitely recommend this product. It works much better than something you could get at a hardware store like Goof Off.