Marsflex TPMS Sensor 42607-33021 Compatible for Toyota Lexus Scion Pontiac, Tire Pressure Monitoring Sensors for Camry Prius Corolla rav4 Scion Yaris Replaces 42607-33011 PMV-107J 315MHz Set of 4ClimatePartner certified

Worked fine on my 2008 Prius. Used Techstream software to program the serial numbers of the Marsflex Sensors into the Prius. I found that for the Prius, the scissor jack method for breaking the bead could not be done, but I used a 4x4 wood fence post as a lever beneath the car to push down on a block of wood on the tire to break the bead, and that worked well for me. Thanks to everyone that left detailed reviews for this product. I will update this review if any of the sensors go bad prematurely.

Had them installed in a 2010 Prius. First, the shop will say they can only work with some sensors. Ask them to try scanning these to see of they show up. The shop I used had Autel. Second, the shop I went to installed 1 incorrectly resulting in a flat tire. I recommend using a local tire shop instead of a national chain. They can install them in minutes and know what they are doing. Let’s hope the battery in these last for a while! Everyone is charging $120 per tire for new sensors, which is insane.

These things work good!! Programing was EASY! I work at a dealer and oem prices were absurd. Took a risk with these and they've been good. Programmed like the oem sensor and no issues since the day I got it. Fits just like oem!

Would had been a five stars because they are preprogramed for the car. Just need to install and relearn....I bought and installed all four sensors...(two out of four sensors in my 2014 Prius went bad). However, one was not reading the tire pressure correctly, reading 20 psi when the tire has 35 psi. So, TPMS light stayed on. Had to reuse/reinstall one of the old sensor, relearned and now working, but with one old sensor...praying the battery will last.UPDATED: This review is updated to 4 stars because the seller reached out to me immediately and offered to ship me 2 sensors as replacement for free. I received the shipment in 2 days.

This worked after I had mechanic use the obdi tool to recognize it!

Recomiendas excelentes productos

I bought an XTool TP150 that I used to relearn the sensors but any tire shop could do it. It takes 2 min with the tool. The sensors are preprogrammed, but you have to pair them to the ECU.After taking the tires off, I used a VEVOR manual tire bead breaker to break the bead all around (just step on it after the bead is broken) and then to hold the tire down far enough that I could replace the sensor. Windex around the bead / rim to lubricate it and then remove the bead breaker and air it up. No problems on 5 tires, took about an hour all in with an impact to take off / put on the tires.All in, it cost less to buy all of the tools and to do it myself vs what it would’ve cost to have the tire shop do it once. After the initial investment, it’s just the sensors and they’re cheap!

These are a lot cheaper than OEM by 4x the amount and they work just fine.