GROHE BauEdge - Smooth Body Single-Lever Basin Mixer Tap (1-Hole Installation, Metal Lever, 28mm Ceramic Cartridge, Water Saving Technology, No Waste Set, Tails 3/8 inch), Size 144mm, Chrome, 23330000

Excellent quality and a great looking tap. Would recommend highly.

There are taps and there are Grohe taps. There's a reason why they are more expensive than others because they are solidly built and designed to last for years. I bought this Grohe BauEdge single lever basin tap to replace a similar looking but poor quality tap installed in my new build home.As many others have pointed out and as is clearly stated in the listing, this tap has pre-fitted Euro sized tail ends and so existing pipework may require appropriate fittings if converting from UK spec fittings. As I have isolation valves fitted to my pipework, the job was straightforward enough. I purchased a pair of 15mm to 3/8 copper tails from my local hardware store for less than a fiver. If you're doing it the way I did it, you will also need new 15mm compression nuts and olives for attaching the tail end fittings to the isolation valves. You may also need some PTFE tape to ensure a watertight fit. There are conversion fittings available from Amazon but they wouldn't have been suitable for my existing isolation valves unless I was prepared to buy a length of copper piping, which I wasn't.I also purchased the Grohe Concerto base plate which has ensured a neat and watertight seal into the basin hole. Not only that, the tap looks better in my opinion with the chrome decking plate.This is a good quality tap at an affordable price and it looks great. It's easy to clean too.

Nice design but adaptors to connect flexies should be included .

Good price, nice style, easy to fit. Needs 3/8 to 1/2” compression adaptor for typical UK fittings

Solid and reliable as always from this brand. The tap comes with the tap tails but you will probably need adaptors to fit them onto the normal valves we use in the UK.

We replaced an Ikea tap. This one is good for our Airbnb room since it is tall enough that the kettle can be filled from it. It is also very smart and flow is easy to control.

Very nice tap, but beware, this is a European model and you will need the adapters to fit UK 15mm pipe to the flexi hose which is 3/8.GROHE Pair of Adaptors for UK Fittings - 15mm Compression by 3/8 Inch BSP Male Thread (Ideal for connecting European 3/8" Flexi Connections, Brass Adapters for Kitchen & Bathroom Mixer Taps), Set of 2

Decided to pay more for a quality tap.... so went for this GROHE BauEdge. I fitted it to an Ikea bathroom sink, and as the tap hole is on the large side.... I ordered the additional base, but I ended up having to modify the rubber seal so that it fitted the GROHE BauEdge. I also ordered the adaptors for the tails.... and this meant I had to add a small length of 15mm copper pipe so I could attach the adaptors to my isolator valves. As I had some spare copper and some spare 15mm compression fittings... (and the know how!) ...this was all very easy and straight forward. The tap seems very high quality. The tap controls water flow precisely ... and I just hope it lasts!!