Epoxy Resin 2 Gallon - Crystal Clear Epoxy Resin Kit - Self-Leveling, High-Glossy, No Yellowing, No Bubbles Casting Resin Perfect for Crafts, Table Tops, DIY 1:1 Ratio

I've been building tabletops and bartops for 5 or more years and by no means am I a pro....I've used many different brands of Epoxy Resin and this particular brand is by far the best that I've used for the final top coat! Beautiful super clear gloss...mixed correctly there are virtually almost no bubbles! I pay no attention to most of the negative reviews. If the user has a bubble issue, curing/drying issue I know from plenty of past expierence that 99% of the problem is the user....period! I've had smudge issues from several brands on the final coat.....not this one! If you're getting a lot of bubbles and problems with the curing/drying proccess your're not following the instructions properly.....

Love this resin.It is crystal clear and has a nice work time with consistency.Highly recommend.

Easy to use. Clear. Cure time is reasonable. Durable.

great price, low smell and bubbles. Will buy again

This resin has a higher viscosity meaning its thinner and heavy items will sink (this includes glitter, even fine glitter like in the photo). Good for molds but would not recommend for other items like tumblers that is because it’s thinner and will cause fish eyes. Top coat had no fish eyes and gives that glossy, glass like finish.The only negative for me is the odor, especially while curing.Takes about 24 hours to cure, long time work with, colors blended well. Easy to use like most resins, crystal clear, and I would use again.

If Easter was a resin and we had more than one of them, we would have Polyester [drums: ba dum dum, crash]Now that I have your attention:This product is very high quailty: from the packaging, to the resin, to the instructions.It came with stirring sticks, rubber gloves, and two sets of measuring cups, you should label them A and B appropriately. I mixed small batches 1:1 by weight (the instructions say 1:1 by volume), but by weight (which is easier if you have an an accurate electronic scale that can read down to 10ths of a gram) worked very well. I used this to make a back shell for an electronic connector that I modified. I added 2% by weight of Testors Flat Black Enamal Paint (from any Hobby Store); just a dozen drops is all it took to make it totally opaque to hide the wires. We call this 'potting' in electronics. The project came out perfectly. I used the 1/4 inch layer every 4 hours method as my back shell was 3/4 high X 1 inch wide X 1 inch long.The instructions say not to add more than 5% non-aqueous (no water) pigment, I used only 2% of oil based enamel and got great results.5 stars all around.16 Oz kit:Update: Above review was from June 2023.I just ordered again in January 2024.Note: The 4 Measuring Cups, 2 Nitrile Gloves, and 4 Stirring Sticks are no longer provided in this kit.Still, great price, great quality.Also, I now pour my 3/4 high X 1 x 1 inch mold in one pour (not 3) and I get the same results.

Only epoxy I use now. For some reason EVERY other kind makes me break out in hives. This brand is amazing- No reaction. I use this for all of my projects now.You don’t have to torch after- almost zero bubbles. Although I do still torch quickly just to ensure there are no bubbles. The drying time is impressive as well. The results are always crystal clear. I had a table I made with another epoxy brand and had multiple issues- went back over it with this epoxy and it instantly looked better.The pumps are pointless- tiniest but comes out with each pump- more efficient to simply pour it.Very low smell/odor

It works good, but the stir time is a bit longer than some. I stir for 4 minutes and it worked. I wish lids and bottles were different colors. In other words A could be white and B could be black. If you put the lid on the wrong bottle, it may be stuck there as the resin will set up.